Many data centers historically didn't put much more thought into their deployment of server racks beyond basic functionality, air flow, and the upfront costs of the rack itself. These days, the widespread adoption of hi-density applications are causing major hot spots concerns and capacity issues. These factors along with the high costs of power require a sound understanding of how closely tied your server rack deployment is to overall server room and data center efficiency strategy.
Long term Server Rack costs considerations.
In a recent survey conducted by the Uptime Institute, enterprise data center managers responded that 42% of them expected to run out of power capacity within 12-24 months and another 23% claimed that they would run out of power capacity in 24-60 months. Greater attention to energy efficiency and consumption is critical.
A report from the EPA to Congress detailed that Data center sector consumed about 61 billion KWh in 2006 - approximately 1.5% total
With the cost of energy skyrocketing at the same time as user demand for more performance is increasing, IT managers are facing a power, space and cost crunch. Some data center managers have already reported that the cost of electricity and cooling in the data center are exceeding the cost of the equipment itself. IDC estimates for every $1.00 spent on new data center hardware, an additional $0.50 is spent on power and cooling, more than double the amount of five years ago. According to Gartner, 70 percent of CIO's are reporting that power and/or cooling issues are now their single largest problem in the data center. Gartner estimates that 50 percent of data centers in 2008 will have insufficient power and cooling capacity to meet demand with 48 percent of the data center budget being spent on energy, up from 8 percent a few years ago.
Here are some things to consider when determining which server rack is best for your environment:
|
1. Know Your Server Rack Cooling Strategy Fully Perforated Server Racks: Select a fully perforated rack for maximum air flow if the primary method of cooling in your datacenter or server room will be ambient air cooling (fans, air handlers, blowers, and/or Computer Room Air Conditioning (CRAC) units and a raised floor). Fully-Sealed Server Racks: Choose a fully-sealed rack if a liquid cooling unit or rack air conditioner will be used in your environment. |
|
|
|
|
|
Rack Air Conditioning & Liquid Cooling As power-intensive applications and server densities have increased, Liquid Cooling Units (modular, temperature-neutral high-density cooling solutions that utilize air/water heat exchangers to provide uniform, effective cooling) are increasingly being used. One of the main benefits of self-contained liquid cooling units is that they result in little or no impact on the existing HVAC system. Liquid cooling units are mounted at the rack base, in a rack “side car” with three cooling modules possible per equipment rack, and can provide a total cooling capacity of 30kW. Rack air conditioners are generally not used in traditional datacenter environments that have adequate CRAC systems. However, if IT equipment will be placed outside of a controlled datacenter environment, such as in a warehouse or factory, rack air conditioners are sometimes used. It is important to keep in mind that rack air conditioners are intended for use in industrial and large spaces, they generate condensation and noise, and they exhaust hot air into the room where the enclosure is located. In a large room, the heat will dissipate. In a smaller room or confined space like a closet, the exhausted hot air from the AC unit can cause the room to overheat. If an AC unit is used in a small room, measures must be implemented to exhaust the hot air from the room. Air conditioner models differ in the amount of cooling output they can provide, so select one appropriate to your needs. Below are formulas to help calculate heat load and select a rack air conditioner: 2. If a rack air conditioner will be used, for every 1 kW consumed, consider that 3412.14 BTU is generated. Air conditioners are rated for different BTU levels. Rack Airflow Tips Server Rack Placement in |
|
|
|
|
|
2. Consider The Latest Power Technologies Power Distribution Units (PDUs) evenly disperse power to servers over the entire power strip. Rack mount power strips are specifically made for server racks and mount vertically or behind mounting posts in the back portion of a cabinet. Power strips fall into two categories: standard and intelligent. While standard power strips have some features that can provide valuable information, such as fuse replacement indicators and current output displays, they must be managed in-person and on-site. In contrast, intelligent power strips provide remote power control, which allows administrators to perform a cold reboot of servers and devices and troubleshoot problems from any location with an internet connection, reducing server downtime and getting vital business functions back online quickly. Remote power products not only provide intelligent control of attached systems, they also allow administrators to leverage leading advances in power distribution, such as 3-Phase power. Three-Phase power technology is not exclusive to remote power management products, but many solutions can accommodate or incorporate it. Compared to single-phase power, 3-Phase power uses fewer circuits, provides a more balanced power load, reduces the overall number of PDUs needed to power equipment, and significantly increases available amperage into the server rack. As an example, in a traditional rack environment, (4) 20-amp circuits would be required for 64 amps of available power (assuming a maximum 80% load). In contrast, a 3-phase circuit can provide up to 51.6 amps per circuit, or more than 82 amps of available power, while only requiring 2 circuits (assuming a maximum 80% load). The cost savings of 3-Phase power is beneficial, especially since experts estimate that in the future, electricity costs could rise from current levels of 10 percent or less of IT budgets to 20-30 percent (3). Other power-related aspects to keep in mind include the number of outlets you will need, plug/receptacle requirements, and redundancy requirements. |
|
3. Select An Appropriately-Sized Rack
Select a server rack with sufficient internal space to house your current equipment and ensure that you have ample space to accommodate planned future expansion as well as any unplanned equipment purchases. Rack mount equipment is measured in the Electronic Industries Alliance (EIA) standard "Rack Units" or Rack "U". One "Rack Unit" is equal to 1.75" in height. Keep in mind that space for accessories, such as environmental monitoring devices, remote power management devices, rack mount LCD monitors, and battery back-up, may be necessary. For example, if you need to accommodate 20 2U servers, you would likely want to choose a rack with a height of 44U to accommodate accessories such as a 1U patch panel, as well as a 2U UPS back-up battery. A rack’s internal height is measured from the tallest point of any side rail to the bottom chassis; internal depth is measured from the insides of both front and rear doors; and internal width is measured from one side panel to the other. Be sure that the rack’s external dimensions can be accommodated in the floor space allotted for it, check that it can be safely moved through all doorways, and ensure that its placement meets any relevant clearance or safety regulations. As a note, always use appropriate rack-loading techniques, including placing heavy items at the bottom of the rack to prevent a rack from becoming too top-heavy, have a plan about what you want to put toward the front and back of the rack (based on how much you will need to access or remove equipment), and have someone help load equipment that is heavy and/or above the height of your head. (1)
4. Physical Security Starts Here
Proper security is vital to the overall well-being and the function of your business. Knowing how your server rack fits into your overall security strategy is just as important. There are several measures you can take to improve the security of the racks and equipment in your datacenter. To begin with, consider purchasing server racks that have locking front and rear doors, as many models offer this option. Second, use environmental monitoring devices to proactively monitor your racks. In addition to allowing administrators to continuously monitor amperage draw per circuit, water leaks, temperature, and other variables, and sending alerts automatically via SMTP/SMS/SNMP when conditions exceed established thresholds, several environmental monitoring devices have door sensors that support “normally open” or “normally closed” conditions and can alert administrators when a cabinet door has been opened. (When a change in state relative to its defined threshold occurs, the device reports an “error” condition.) In addition, there are devices available that work with docked camera pods and sensor pods to allow administrators to continually visually monitor server racks and rooms, as well as record audio clips. If you are planning a new datacenter, you might also consider additional physical security measures such as building the datacenter away from a main road, limiting windows in the datacenter, and providing secure entrances and exists. (2)
5. Tailor Your Rack Design To Work For You
Most manufacturers will allow you to select from many options so that your server rack meets the specific requirements of your environment. There are several common areas that you should be able to select options from.
Shelving: Most manufacturers offer several server rack shelf options, including adjustable or fixed server shelves with four-point mounting; sliding keyboard shelves with 2-point mounting; vented, heavy-duty, or cantilever shelves; and media shelves. Choose a server rack shelf with a depth of 6 inches less than the overall depth of the rack—for example, if you have a 30-inch deep cabinet, choose a shelf with a depth of 24 inches.
Top and Side Panels: Top panels protect equipment from foreign materials. Options include perforated slots for added ventilation, grommet holes for supplementary cable management pathways, and mounting for exhaust fans. Side panels offer security and are often available in several options: solid fixed, solid removable, and solid with vents (louvered).
Mounting Rails: Most racks come with two sets of mounting rails. However, additional sets of rails can be ordered to accommodate different depths and facilitate rack loading. Most manufacturers allow you to choose from Universal Mounting Rails (square holes fitted with cage nuts) or EIA Standard rails (with 10/32 tapped holes). Universal rails will support 19" EIA width rackmount and networking equipment and almost all server equipment. EIA Standard Mounting Rails support 19" EIA width rackmount and networking equipment and some server manufacturers’ rack mounting equipment. Whether the rails have square or tapped holes, all mounting rails comply with the ANSI/EIA-310-D standard (1992). Most major enclosure manufacturers recommend rails with square holes and cage nuts, and currently most off-the-shelf rack models utilize rails with square holes.
Feet: Available “feet” options include retractable anti-tip feet to stabilize mid-to top-heavy loaded racks; casters that attach to the bottom of server cabinets to help maneuver racks; and levelers that should be used if casters are implemented to ensure that the rack remains level once it has been moved from one place to another.
For more information about server racks, including additional advice about purchasing the right rack for your environment, contact a 42U technical sales engineer at 1-800-638-2638. To by rack accessories or “click and build” a rack online, visit Server Rack Online.
References
|
WHY KIDS LOVE COMPUTER NETS Using technology to escape the bounds of the classroom, children are learning to work in ways you never dreamed of when you were their age.
By Elizabeth Corcoran REPORTER ASSOCIATE Jacqueline M. Graves September 20, 1993 (FORTUNE Magazine) – THE RALPH BUNCHE public school sits squarely in Harlem, surrounded by the splintered glass and concrete trappings of inner-city life. Nearby avenues echo with police sirens, blaring music, and angry shouts. But upstairs in room 409, Hamidou Diori is exploring another world altogether -- by way of electronic networks. On the Macintosh screen before him, the 13-year-old seventh-grader maneuvers his computer mouse across a collection of icons that represent stored files and programs. With a few quick clicks, Hamidou has hooked into Internet, the sprawling electronic highway system that by a recent estimate connects more than 15 million people and thousands of universities, government offices, and businesses in 60 countries. Another click and Hamidou has called up a gopher, a kind of electronic guide. Once programmed to search for information on a given subject, it will burrow through databases and bulletin boards that are connected to Internet but reside on computers scattered around the globe. Hamidou's goal: Find a topic for a science project on recycling. He gives the gopher a few key words; in seconds the program makes a preliminary search and flashes a list of possible sources on his screen. Soon Hamidou is scanning feisty, fact-filled messages posted on the bulletin boards by graduate students, professors, and managers in many countries, debating the merits of recycling. If those exchanges don't provide the inspiration Hamidou needs, he will float a few questions of his own across the network. ''I use a whole bunch of databases,'' he nonchalantly tells a visitor. ''You ask these people for help -- and they give it to you.'' From Harlem to Honolulu, electronic networks are sparking the kind of excitement not seen in America's classrooms since the space race. That contest in the 1960s inspired a generation of students to become scientists and engineers. The advent of computer networks could have even more profound effects. In scores of programs and pilot projects, networks are changing the way teachers teach and students learn. Last spring, for example, instead of merely reading about life in Russia from outdated books, schoolchildren in Minnesota exchanged electronic mail with their peers on the Kamchatka Peninsula in eastern Siberia. Students across America tracked the progress of four men biking 10,000 miles in Africa, via reports filed by the riders on an international teachers' network. In the process, the kids learned the continent's geography. Still others got a taste of scientific collaboration by measuring the oxygen in local lakes and comparing results with peers around the world. By tapping into the nets, kids discover ways of working and communicating that weren't available to their parents -- and that will powerfully enhance their prospects when they join the work force of the 21st century. The networks may also play a key role in helping U.S. schools overcome their notorious weakness in teaching math, science, and geography. That's partly why network projects have grants from influential high-tech donors such as IBM, Boeing, AT&T, and Xerox. Bob Hughes, Boeing's corporate director of education relations, looks to computer networks as a key to turning out students who adapt readily to change and who solve problems by seeking out and applying new ideas. Owais Amin... |
